Curtain Track
We have produced a range of curtain tracks to cater for most applications. Three sizes are available:
More information:
ST/A
Ideal for small and domestic applications
Availability, loading and spanning applications:
- Maximum track length of 10.0 metres when used in motorised applications
- Longer track lengths available in walkalong configuration
- Load per runner: 5.0Kg
- Maximum span between fixings: 1.5 metres
Can be fitted direct to overhead soffit fixings, or with fixing arrangement by means of face fixing brackets. Also avaliable is a system of securing to suspension bars or overhead beams, by parallel or right angle universals.
More information:
STB-07 Weighted Handline Pulley
STB-10 Ballraced Master Runner
STB-17 Ballraced Master Runner
ST/B
Ideal for general stage use and cyclorama applications.
Availability, loading and spanning applications:
- Maximum track length of 24.0 metres when used in motorised applications
- Longer track lengths available in walkalong configuration
- Load per runner: 10.0Kg
- Maximum span between fixings: 1.5 metres
Mid range track capable of carring heavy loads between suspension points and with a full range of adaptors for direct overhead fixing, side mounting by face fixing brackets, with universals and tube clips for attachment to scenery bars or beam sections. No limit on length providing sufficent suspension points available. Curtain drops up to 8 metres.
ST/C
Ideal for exceptionally heavy loads. Same physical characteristics as ST/B, but with reinforced sections.
Availability, loading and spanning applications:
- Maximum track length of 24.0 metres when used in motorised applications.
- Longer track lengths available in walkalong configuration.
- Maximum span between fixings: 1.5 metres.
Range of fixings/adaptors available includes overhead, side mounting, universals and side clips.
Charcteristics
Tracks are of all steel construction with fully welded support clips. All sections interchangeable, with short length adapter pieces up to 500mm available. Accurate alignment ensured by close fitting internal spigots, with outside joint plates, assembled by means of tapped holes in track clips for ease of site fitting.
Fixings and suspensions
a) Direct fixing to overhead surface by unversal clips.
b) Face fixing brackets with studbolts for adjustment.
c) Adaptors for attachment to tubular members, either parallel or at right angles.
d) Beam fixing members for joist or channel sections.
Track components
Leaders and wheeled runners are fitted with high strength nylon wheels and are available in either plain or ballraced for exceptional heavy loads.
Method of operation
'Walkalong'
Hand winch (wall or floor fixing)
Electric winch, direct attachment to track.
Electric winch remote.
